Skip to main content
SafeGuard Impact Windows, Doors & Roofing logoSafeGuard Impact home
364
Broward County, Florida — impact window installation service area
Service Area · Broward County, FL

Impact Window Installation in Broward County, FL

SafeGuard Impact Windows, Doors & Roofing installs impact windows and doors across every city in Broward County — HVHZ-rated where required, Miami-Dade NOA certified, in-house crews, full permit pathway included. 1,153+ completed installs and counting.

Last updated June 2026Reviewed by Aldo Dellamano, FL CGC1525289
Call (954) 408-4000or fill out the form for a free Broward County estimate
  • 1,153+
    Projects completed
  • 28
    Cities served
  • 45+
    ZIPs covered
  • NOA
    Miami-Dade NOA

Source: SafeGuard internal CRM (JobNimbus + MarketSharp) · Broward County aggregate · ZIP totals folded across all served cities · refreshed quarterly.

Installs across Broward County

1,153+ impact window & door installs in Broward County

Every pin is a real installed project in Broward County. Click a pin for project type and year. Pin locations are approximate (anonymized within ~1/8 mile of the address).

Installation map

SafeGuard installs impact windows, impact doors, and hurricane-rated entry systems across Broward County. Our in-house crews — not subcontractors — pull permits, coordinate inspections, and handle Miami-Dade NOA verification on every project. 1,153+ completed installs across 28 cities and 45 ZIP codes inside Broward County alone.

Every installation is engineered to the building's wind-zone exposure category and tributary area, with sealed plans, Notice of Commencement, and final inspection included in the scope. Inside HVHZ, every replacement window or door must carry a Miami-Dade Notice of Acceptance (NOA) and pass large-missile impact testing — we verify product approvals against the current Miami-Dade product-approval database before submittal.

Service area

Cities We Serve in Broward County

Tap a city for hyper-local install data — top ZIP coverage, project counts, and the permit pathway specific to that jurisdiction.

Impact Window Installation in Broward County

Hurricane Wilma struck Broward in October 2005 as a Category 3 storm. It brought sustained 125 mph winds. That was the worst structural damage the county had seen since Hurricane Andrew. Tamarac, Sunrise, and Plantation lost roofs and windows across entire subdivisions. That damage triggered a replacement wave still working through 1980s and 1990s housing stock nearly 20 years later. Today, every Broward permit for impact windows must comply with the Florida Building Code HVHZ chapter. That chapter requires TAS 201, TAS 202, and TAS 203 testing. Those tests cover impact, pressure cycling, and water infiltration. SafeGuard brings 30 years of direct South Florida experience. We have worked through every major hurricane and code update since Andrew. Our South Florida impact-windows services cover all 7 major Broward ZIP codes. Those range from 33301 in Fort Lauderdale to 33321 in Tamarac. No homeowner needs a second contractor. Permits for unincorporated parcels route through Broward County Building Code Services. Incorporated cities each run their own building department. We handle both without delay.

Why Broward Homeowners Choose Impact Windows

  • HVHZ Code Compliance

    Every window we install carries a current Miami-Dade NOA — the same product-approval standard Broward enforces county-wide. Non-compliant windows fail final inspection and must be removed at the homeowner's cost. We verify NOA numbers before ordering any product.

  • Insurance Premium Savings

    Impact-resistant windows qualify for a wind-mitigation credit under Florida's insurance rating system. Many Broward homeowners see 10–30% reductions on their annual windstorm premium after a licensed wind-mitigation report is filed. We help you get that report as part of the job closeout.

  • Salt-Air and Humidity Defense

    Coastal Fort Lauderdale and Hollywood face direct Atlantic salt-air corrosion that destroys standard aluminum frames within 5–7 years. We specify marine-grade finishes and thermally broken frames rated for high-humidity coastal exposure, matching the environment where the window will live.

  • Laminated Glass Interlayer

    All hurricane windows we install use a laminated glass interlayer — a bonded plastic film that holds shattered glass in place during a storm. This layer is what separates true hurricane-proof windows from tempered-only glazing, which can still allow dangerous pressure breaches.

  • Full Permit and Inspection Service

    We pull every permit and schedule every inspection — city or county. Homeowners in Coral Springs, Plantation, and Hollywood never have to call a building department. We track the permit from application through certificate of completion and hand you the final paperwork.

  • No Subcontractors, Ever

    Every SafeGuard installation is completed by our in-house crew — not a subcontracted labor team hired for the day. That means the people who measured your openings are the same people installing the frames, and our warranty covers the whole job, not just the product.

  • Energy Efficiency Gains

    Hurricane impact windows with low-E (low-emissivity) coatings meet ENERGY STAR criteria for South Florida's hot-humid climate zone. Reduced solar heat gain lowers cooling loads, which cuts monthly FPL bills. Many Broward homeowners report 15–25% HVAC savings in the first summer.

Impact Window Installation in Broward County

Impact Window Installation: Materials and Products

SafeGuard installs hurricane windows from four HVHZ-certified manufacturers: PGT, CGI, ES Windows, and Custom Window Systems. Each brand offers laminated insulated glass units in casement, single-hung, and impact sliding configurations. Those options match Broward's diverse housing stock. That stock ranges from Fort Lauderdale's 1950s-era concrete block homes to 2-story stucco construction in Pembroke Pines and Miramar. Frame choice comes down to two main materials: vinyl and aluminum. Vinyl frames deliver superior thermal performance and resist salt-air corrosion at a lower price point. That makes them a strong pick for Pompano Beach and Deerfield Beach coastal properties. Aluminum frames carry higher structural ratings and suit larger openings. They are ideal for Intracoastal high-rises along Fort Lauderdale's 17th Street corridor. They also work well for commercial storefronts near Las Olas Boulevard. All products we spec carry Miami-Dade NOA numbers. They pass TAS 201 large-missile impact testing, TAS 202 cyclic pressure, and TAS 203 water infiltration. Those are the three tests Florida requires in the HVHZ. Before any order is placed, we provide a free written estimate with product specs. You will know exactly what you're getting.

Broward HVHZ Requirement

Impact Window Installation in Broward County: The Process

The installation process for hurricane impact windows in Broward County follows a precise sequence. It starts well before any crew arrives on site. First, a SafeGuard project manager measures every opening. That includes rough opening dimensions, sill conditions, and existing frame material. This ensures the replacement unit arrives pre-sized and ready to set. In Tamarac and Sunrise, many homes were built during the 1980s and early 1990s. We often find original aluminum single-pane frames in those homes. Those frames must be completely removed before the new HVHZ unit can be buck-set into the masonry. The permit application goes to the relevant city building department. For unincorporated parcels, it goes to Broward County Building Code Services. We include the manufacturer's NOA documentation and our signed engineer drawings. Most Broward cities schedule a rough-opening inspection within 5–10 business days of permit issuance. Our crew installs each unit using approved anchorage per the NOA installation instructions. We apply flashing tape and sealant to meet water-infiltration code. Then we call for the final inspection. We walk the homeowner through the completed work. We hand over all permit closeout documents before leaving the site.

How Our Broward Impact Window Installation Works

  1. 1

    Free On-Site Estimate

    A SafeGuard project manager visits your Broward County home at no charge. We measure every opening, assess the existing frame condition, and note any structural or water-damage issues that could affect the installation. You receive a written estimate with product specs, pricing, and a projected timeline before we ask for any commitment.

  2. 2

    Product Selection and NOA Verification

    We match your openings to the correct HVHZ-rated window from our product lines — PGT, CGI, ES Windows, or Custom Window Systems. Every unit we quote carries a valid Miami-Dade NOA number. We confirm the NOA is current and covers your specific opening size before placing the order.

  3. 3

    Permit Application and Approval

    SafeGuard prepares and submits the permit package to your city's building department or to Broward County Building Code Services for unincorporated parcels. We include the manufacturer's NOA, our engineer's signed drawings, and the contractor license documentation. Most Broward permits are approved within 5–10 business days.

  4. 4

    Old Window Removal

    Our in-house crew removes your existing windows carefully, protecting interior finishes and landscaping. For homes in Coral Springs and Plantation where original frames were set in pocket openings, we extract the full frame assembly and inspect the rough opening for water damage or rot before proceeding. Any damage found is documented and repaired before the new window goes in.

  5. 5

    HVHZ-Compliant Installation

    Each new impact window is set, anchored, flashed, and sealed per the manufacturer's NOA installation instructions. Anchorage spacing and embedment depth are checked against the approved drawings. We apply flashing tape at the sill and jambs to meet TAS 203 water-infiltration requirements, then caulk the perimeter with a Florida Building Code-approved sealant.

  6. 6

    County Inspection and Sign-Off

    We schedule and attend every required inspection — rough opening, progress, and final. The inspector verifies anchorage, flashing, and product NOA compliance. Once the final inspection passes, we collect the certificate of completion and provide it to the homeowner. The permit is closed out and on record with the county.

  7. 7

    Wind Mitigation Report Assistance

    After installation, we help homeowners arrange a wind-mitigation inspection with a licensed inspector. The resulting report documents your new hurricane windows and supports an insurance premium reduction request. Many Broward homeowners reduce their annual windstorm premium by 10–30% after filing the report with their carrier — a savings that compounds every year.

Hurricane Window Codes in Broward County

  • 175+ mph
    HVHZ Design Wind Speed
    Minimum rating for all Broward impact windows
  • 3 Tests
    Required ASTM/TAS Tests
    TAS 201 impact, TAS 202 pressure, TAS 203 water
  • 10–30%
    Typical Insurance Savings
    Wind-mitigation credit after HVHZ window install
  • 30+ Years
    SafeGuard Field Experience
    Every major hurricane and code update since Andrew

Hurricane Windows for Broward County Homes

Vinyl vs. Aluminum Impact Window Frames

Vinyl FramesAluminum Frames
Salt-Air ResistanceExcellent — no corrosionGood with marine-grade finish
Thermal PerformanceSuperior — lower U-factorModerate — requires thermal break
Structural RatingStrong for standard openingsHigher — suits large openings
Best Broward Use CaseCoastal homes, Pompano, DeerfieldHigh-rises, commercial, Fort Lauderdale
Price PointLower — budget-friendlyHigher — premium structural option

Impact Window Installation Across Broward Neighborhoods

Broward County has 31 incorporated cities. Each one runs its own permitting process. A Coral Springs permit looks different from a Hollywood permit. Both still follow the same HVHZ product standards. SafeGuard's crews know every local building department across the county. They are familiar with fast-turnaround offices in Plantation and Tamarac. They also handle the larger review queues in Fort Lauderdale's urban core. Hollywood is a beachfront city packed with condo towers and 1960s-era single-family blocks. It sits just north of Miami-Dade. There, we regularly replace original jalousie and awning windows with modern hurricane-proof windows. Many of those jobs are in HOA-governed buildings. HOA architectural committees in Pembroke Pines and Miramar often require pre-approval of frame color and glass tint. That pre-approval must happen before the permit application is submitted. Our project managers handle that coordination. Homeowners don't have to navigate two approval processes alone. Impact window installation in these communities also requires compliance with flood zone overlays. Homes in FEMA flood map AE zones along the Intracoastal need impact-rated products. Those products must be rated for both wind and water. We confirm flood-zone status for every job before ordering product.

Broward Neighborhoods We Serve

  • Fort Lauderdale

    County seat with Intracoastal high-rises, historic single-family neighborhoods near Hugh Taylor Birch State Park, and dense urban condo stock. Impact window installation here often involves large-format openings requiring aluminum frames and engineered anchorage drawings from our licensed team.

  • Hollywood and Hallandale Beach

    Beachfront cities between Fort Lauderdale and Miami-Dade with dense condo and family-home stock. Salt-air exposure is severe — we specify marine-grade vinyl or coated aluminum frames rated for direct coastal exposure, and we handle HOA pre-approvals as part of our standard process.

  • Tamarac, Sunrise, and Plantation

    Central-west Broward's highest-volume impact window installation corridor. The 1980s and 1990s housing stock in these cities sustained major damage in 2005 during Hurricane Wilma. Many owners still have single-pane aluminum originals — we remove and replace them with HVHZ-certified hurricane impact windows and close the permit in a single mobilization.

  • Coral Springs and Parkland

    North-central Broward master-planned communities with strict HOA architectural guidelines. Hurricane-resistant windows must match approved frame profiles and color palettes — our project managers work directly with HOA boards to pre-approve product specs before permit submission, saving 2–3 weeks of back-and-forth.

  • Pompano Beach and Deerfield Beach

    Northern coastal Broward with a mix of oceanfront condos and 1970s single-family homes. These properties face some of the most intense salt-air exposure in the county. We recommend vinyl frames with impact-resistant laminated glass for cost-effective protection that won't corrode within 5 years like standard aluminum does in this environment.

Serving All of Broward County

Get a Free Impact Window Estimate in Broward County

Broward County HVHZ Compliance

Broward County sits inside South Florida's High-Velocity Hurricane Zone (HVHZ) — every impact window or door installed here must carry a Miami-Dade Notice of Acceptance (NOA) and pass large-missile impact testing under ASTM E1886/E1996. Design pressure ratings are checked against the building's wind-zone exposure category and tributary area. SafeGuard handles the entire submittal package — sealed plans, NOA verification, Notice of Commencement, and final inspection.

Read the Broward County permit guide

FAQs

Broward County impact window questions

Does every home in Broward County need HVHZ-rated impact windows?

Yes. Every Broward County property — coastal or inland — sits inside the High-Velocity Hurricane Zone. That means every replacement window must carry a Miami-Dade Notice of Acceptance and pass TAS 201 large-missile impact testing. There are no exceptions based on distance from the coast. A home in Coral Springs faces the same product requirements as one on Fort Lauderdale Beach.

How long does impact window installation take in Broward County?

Most Broward County impact window installation projects take 1–3 days of on-site work, depending on the number of openings and the condition of the existing frames. Permit approval adds 5–10 business days in most incorporated cities. We order product after permit approval, and lead times from our manufacturers currently run 4–8 weeks. We give homeowners a clear timeline at the estimate stage.

Will impact windows lower my homeowners insurance in Broward County?

Impact-resistant windows qualify for a wind-mitigation credit under Florida's insurance rating system. After installation, a licensed wind-mitigation inspector documents your new hurricane windows and submits a report to your carrier. Many Broward County homeowners see annual windstorm premium reductions of 10–30%. The savings vary by insurer, coverage level, and the percentage of openings protected.

What brands of hurricane windows does SafeGuard install in Broward County?

SafeGuard installs hurricane impact windows from PGT, CGI, ES Windows, and Custom Window Systems — all HVHZ-certified and Miami-Dade NOA-approved. Each brand offers multiple frame profiles and glass packages to match Broward County's diverse housing stock, from 1950s concrete block homes in Fort Lauderdale to newer 2-story construction in Pembroke Pines. We recommend the best product for your specific openings and budget.

Do I need HOA approval before installing hurricane windows in Broward County?

Many HOA-governed communities in Broward County — particularly in Coral Springs, Parkland, and Pembroke Pines — require architectural committee approval before permit submission. This covers frame color, glass tint, and profile style. SafeGuard project managers handle HOA coordination as part of our standard service, so you don't have to navigate two separate approval processes on your own.

Who pulls the permit for impact window installation in Broward County?

SafeGuard pulls every permit on every job. Permits for incorporated Broward County cities go to each city's building department. Unincorporated parcels route through the Broward County Building Code Services Division. We handle both. Aldo Dellamano, our licensed Florida General Contractor (CGC1525289), is the contractor of record on every SafeGuard permit filed in Broward County.

What is the difference between hurricane windows and regular impact windows?

Florida homeowners often search for hurricane windows, hurricane impact windows, impact-resistant windows, and hurricane-proof windows — all terms describe the same product: HVHZ-rated, laminated glazing units tested to TAS 201 large-missile standards. In Broward County, all of these products must carry a Miami-Dade NOA to receive a building permit. SafeGuard installs only products that meet this standard — no tempered-only glass, no un-approved assemblies.

Ready to upgrade your Broward County home?

Free estimate that includes the full permit pathway — sealed plans, Miami-Dade NOA verification, Notice of Commencement, and inspections.

(954) 408-4000Get a free Broward County estimate

County hub for Broward County — slug broward.

Content Disclosure

This article is provided for general information only and reflects current Florida Building Code requirements, common South Florida construction practices, and SafeGuard's field experience. Actual project costs, permit requirements, material availability, and timelines vary based on your home, municipality, and project scope. Florida law requires that any residential construction work over $1,000 be performed by a licensed contractor — always consult a Florida-licensed contractor before starting an impact-window, impact-door, or roofing project and verify credentials at myfloridalicense.com. This guidance is not a substitute for a project-specific estimate or on-site evaluation by a licensed professional.