Skip to main content
SafeGuard Impact Windows, Doors & Roofing logoSafeGuard Impact home
364
SafeGuard impact-window installation in Kings Point, FL
Service Area · Kings Point, FL

Impact Window Installation in Kings Point, FL

Impact window installation in Kings Point, FL — Florida Product Approval rated, HOA-coordinated, and permit-handled. Free estimates from a licensed contractor.

Last updated July 2026Reviewed by Aldo Dellamano, FL CGC1525289
Call (954) 408-4000or fill out the form for a free Kings Point estimate
Installs in Kings Point

48+ Kings Point homes already installed by Safeguard

Every pin is a real Kings Point impact window or door install. Click a pin for the project type and year. Pin locations are approximate (anonymized within ~1/8 mile of the address).

Installation map

At a Glance

Kings Point Impact Window Installation — Key Facts

Service area
Kings Point, FL — entire city + adjacent Palm Beach County
Also called
Hurricane windows · Hurricane-impact windows · Impact-resistant windows · Hurricane-proof windows
License
FL CGC1525289 (General Contractor)
Plus CCC1335157 (Roofing), CFC1434398 (Plumbing), CMC1251666 (Mechanical)
Product approval
Florida Product Approval (FL is the standard outside HVHZ); Miami-Dade NOA available for clients who prefer the stricter cert
Permit issuer
City of Kings Point Building Division + Palm Beach County
Manufacturers we install
PGT WinGuard · CGI · ES Windows · Custom Window Systems · Eco Window Systems
Permit pathway
Sealed plans, Florida Product Approval verification, Notice of Commencement, both inspections — handled end-to-end

Permit Pathway

Pulling a Kings Point permit yourself? Read our Palm Beach County impact-window permit guide before you submit — application steps, current review windows, and the four reasons most submissions get rejected.

Across the County

Kings Point is one of dozens of communities we serve. See the full Palm Beach County impact window installation hub for county-wide installation counts, code requirements, and every neighboring city we install in.

Kings Point is a 55+ master-planned community in unincorporated Palm Beach County. Its roughly 14,200 residents know exactly what a serious storm can do. Hurricane Wilma crossed the county in October 2005 as a powerful Category 3 storm. It shredded screen enclosures and shattered single-pane windows. Those windows were standard when these condos and townhomes were built in the 1970s and 1980s. Decades later, many units in Kings Point Villas still carry that original glazing. The adjacent Palm Greens community also has units with the original single-pane glass. That leaves residents exposed to wind damage. It also exposes them to insurance penalties that come with unprotected openings. SafeGuard Impact Windows, Doors & Roofing handles impact window installation from permit pull to final inspection. We use no subcontractors and deliver no surprises. Whether your home is in ZIP code 33484 or 33446, our licensed crews are ready. We bring Florida Product Approval-rated hurricane windows to every job. Our full-service process is built around the HOA coordination this community requires.

Impact Window Installation in Kings Point

Kings Point sits about 5 miles inland from the Atlantic coast. That changes the compliance picture compared to beachfront towns. The community falls outside the Miami-Dade/Broward High-Velocity Hurricane Zone (HVHZ). HVHZ is South Florida's most demanding wind-code territory. Because of that, the applicable compliance pathway is Florida Product Approval (FPA). A Miami-Dade Notice of Acceptance (NOA) is not required here. Products must still pass large-missile impact testing under Florida Building Code test protocols TAS 201, TAS 202, and TAS 203. The review route runs through the state's product approval database instead of the county's local NOA process. SafeGuard processes over 1,500 building permit applications per year. Those cover every window, door, and roofing project the company touches. Our team knows exactly which Palm Beach County Building Division forms are needed. We know how to stage submissions to avoid re-review delays. Homeowners in Kings Point Villas and the adjacent Villages of Oriole benefit from that permit fluency at every inspection. For a full overview of our South Florida impact-windows services, visit the pillar page. Learn more about impact window installation in our service guide.

Why Kings Point Homeowners Choose Hurricane Windows

  • Insurance Premium Savings

    Florida insurers reward verified impact protection. After a licensed inspector submits a wind-mitigation report (a formal document detailing your opening protection), many Kings Point homeowners see premium reductions of 20–45%. The savings often pay back a significant share of the installation cost within 5–7 years.

  • Post-Wilma Peace of Mind

    Hurricane Wilma's October 2005 pass through Palm Beach County exposed the vulnerability of 1970s-era single-pane windows. Today's hurricane-proof windows use a laminated glass interlayer (a clear plastic film bonded between two panes) that holds the glass in place even after impact, keeping wind and rain out of the living space.

  • HOA Architectural Review Ready

    Kings Point's master association requires architectural-review approval before any exterior alteration. SafeGuard prepares the submittal package — product spec sheets, frame color samples, and site diagrams — so the board has everything needed to vote quickly. We do not submit the permit until HOA approval is in hand.

  • No Shutters, No Hassle

    Hurricane impact windows (also called hurricane-resistant windows or impact-resistant windows) replace the seasonal shutter routine entirely. For the 55+ residents of Kings Point, eliminating the need to hang accordion or panel shutters before every storm is a meaningful quality-of-life improvement.

  • Noise and UV Reduction

    The same laminated glass that blocks windborne debris also cuts outside noise by 30–50% compared to single-pane glass, and blocks over 99% of UV rays. That matters in a community where afternoon thunderstorms are a near-daily summer occurrence and sun fading of furniture is a real concern.

  • Energy Efficiency Gains

    ENERGY STAR-rated impact windows reduce solar heat gain, cutting cooling loads in Palm Beach County's hot, humid summers. Many hurricane impact windows carry ENERGY STAR certification — see energystar.gov for certified product listings — and may qualify for federal tax credits.

Hurricane Impact Windows — Kings Point, FL

Impact Window Installation in Kings Point: Materials & Process

SafeGuard installs hurricane impact windows from four manufacturer lines: PGT, CGI, ES Windows, and Custom Window Systems. All four carry Florida Product Approval for Palm Beach County installations. Frame material choices include vinyl and aluminum. The right pick depends on the unit's orientation and the HOA's approved color palette. Vinyl frames offer slightly better thermal insulation. They also resist corrosion in the moderate salt-air environment of this inland community. Aluminum frames are thinner-profiled. They are easier to match to original opening dimensions in older 1970s-era condo construction. Rough openings in that era are often non-standard. Both frame types accept the laminated glass interlayer required to meet large-missile testing. Casement and single-hung window styles are the most common formats in Kings Point's townhome sections. Our crews carry templates for both styles. That minimizes field-cut adjustments and keeps the installation day on schedule. All hurricane-proof windows we install come with manufacturer warranties of at least 10 years on the glass seal and frame finish.

Florida Building Code Compliance Note

How Impact Window Installation Works in Kings Point

  1. 1

    Free On-Site Estimate

    A SafeGuard project consultant visits your unit in Kings Point — whether in Kings Point Villas, the adjacent Delray Beach corridor, or another section — to measure every opening and assess the existing frame condition. You receive a written, itemized estimate at no cost and with no sales pressure.

  2. 2

    HOA Architectural Review Submittal

    Before any permit is filed, we prepare the HOA submittal package: product spec sheets with Florida Product Approval numbers, frame color samples matched to the master association's approved palette, and a site plan showing each affected opening. We track the review calendar and follow up with the board so you don't have to.

  3. 3

    Permit Application to Palm Beach County

    Once HOA approval is confirmed, SafeGuard files the permit application with the Palm Beach County Planning, Zoning & Building Division. Our office handles all documentation — product approval certificates, signed installation drawings, and contractor license verifications — and coordinates the review timeline with the county.

  4. 4

    Pre-Installation Preparation

    On installation day, our in-house crew protects interior surfaces with drop cloths and removes any window treatments or blinds that could be damaged. We stage materials on-site to minimize noise and disruption in the shared-wall condo environment common throughout Kings Point.

  5. 5

    Window Removal and New Unit Installation

    Existing single-pane or non-impact windows are carefully removed and disposed of. The new hurricane-impact windows are set into the opening, shimmed level, anchored per the approved installation drawings, and sealed with a continuous bead of high-performance silicone. Each unit is tested for smooth operation and a weather-tight seal before the crew moves to the next opening.

  6. 6

    County Inspection and Final Sign-Off

    SafeGuard schedules and attends the Palm Beach County building inspection. The inspector reviews the installation against the approved permit drawings and product approval documentation. Once the inspection passes, you receive the signed-off permit card — the document your insurance carrier needs to process a wind-mitigation discount.

  7. 7

    Wind-Mitigation Report Coordination

    After final inspection, we can connect you with a licensed wind-mitigation inspector who will document your new hurricane windows in a formal report for your insurance company. Many Kings Point homeowners see their annual premium drop within 30–60 days of submitting that report.

Hurricane Window Code Numbers for Palm Beach County

  • 150+ mph
    Design Wind Speed
    Minimum Florida Building Code wind-load rating for Palm Beach County structures
  • TAS 201/202/203
    FPA Test Protocols
    Large-missile and cyclic-pressure tests required for Florida Product Approval
  • 20–45%
    Typical Insurance Savings
    Premium reduction range after a wind-mitigation report is filed with the insurer
  • 1,500+
    Permits Filed Per Year
    SafeGuard's annual permit volume across all four South Florida counties

Palm Beach County Permit-Ready Window Replacement

Single-Pane Windows vs. Impact-Resistant Windows

Original Single-Pane WindowsHurricane Impact Windows
Wind ProtectionFails at 90–100 mph gustsRated 150+ mph per FBC design wind speed
Glass TypeAnnealed or tempered — shatters on impactLaminated with interlayer — holds together after impact
Insurance DiscountNone — no wind-mitigation credit20–45% premium reduction after wind-mit report
Storm Prep RequiredShutters must be hung before every stormNo shutters — always protected
Energy EfficiencyHigh solar heat gain — higher cooling billsLow-E glass cuts solar heat gain significantly
Noise ReductionMinimal — single-pane transmits exterior noise30–50% noise reduction vs. single-pane

Serving Kings Point Neighborhoods and Adjacent Communities

SafeGuard's installation crews cover both Kings Point ZIP codes — 33484 and 33446. We also work regularly in adjacent communities with similar construction. Palm Greens borders Kings Point to the west. It has nearly identical 1970s-to-1980s condo and townhome building stock. Palm Greens faces the same HOA coordination requirements as Kings Point. The Villages of Oriole is a 55+ community just a short drive away. Its residents often call us after seeing our work in Kings Point Villas. Palm Beach County's permitting process applies uniformly across all these unincorporated areas. That means our team pulls from the same permit workflow for every job in this corridor. We verify contractor license status through the Florida DBPR. Our general contractor license CGC1525289 and roofing license CCC1335157 are both active. Both are searchable at the Florida DBPR contractor lookup. Kings Point has high HOA density and aging window stock. Palm Beach County also requires a 150+ mph design wind speed. Together, these factors make impact window installation one of the most valuable upgrades a homeowner here can make — financially and structurally.

What Sets SafeGuard Apart for Kings Point Installations

  • In-House Crews Only

    SafeGuard never subcontracts installation work. Every crew member is a direct SafeGuard employee, trained on the specific anchoring and sealing requirements for Palm Beach County's FPA-approved installation drawings. That means consistent quality across every opening in your unit.

  • Four Active DBPR Licenses

    Aldo Dellamano, SafeGuard's licensed contractor of record, holds four active Florida DBPR credentials: General (CGC1525289), Roofing (CCC1335157), Plumbing (CFC1434398), and Mechanical (CMC1251666). That breadth means we can pull a single combined permit when a project touches multiple trades — saving time and coordination hassle for the homeowner.

  • Deep HOA Experience

    After two decades of work in master-planned 55+ communities across South Florida, our team has seen nearly every HOA architectural review format. We prepare complete, board-ready submittal packages that typically clear review in a single meeting rather than requiring multiple resubmissions.

  • Manufacturer-Certified Installers

    We install hurricane-resistant windows from PGT, CGI, ES Windows, and Custom Window Systems — brands whose Florida Product Approval certifications are among the most comprehensive in the state. Manufacturer-certified installation is often a prerequisite for the full warranty to be valid.

  • Full Flood-Zone Awareness

    Older condo sections in Kings Point have 1970s-era drainage systems that create elevated flooding risk during major rain events. We review the FEMA Flood Map Service Center data for each address and factor base-flood elevation into sill-height decisions where relevant.

Kings Point HOA-Approved Window Replacement

Get a Free Impact Window Estimate in Kings Point

FAQs

Kings Point Impact Window Installation — Common Questions

Does Kings Point require HOA approval before impact window installation?

Yes. Kings Point is governed by a master association that requires architectural review before any exterior alteration, including window replacement. SafeGuard prepares the full HOA submittal package — product spec sheets with Florida Product Approval numbers, frame color samples, and a site diagram — and does not file the Palm Beach County building permit until HOA approval is confirmed. Most boards approve impact window projects in a single meeting when the package is complete.

Are Kings Point impact windows required to meet Miami-Dade NOA standards?

No. Kings Point is outside the Miami-Dade/Broward High-Velocity Hurricane Zone (HVHZ), so the applicable compliance pathway is Florida Product Approval (FPA) rather than a Miami-Dade Notice of Acceptance (NOA). Products still must pass large-missile impact testing under Florida Building Code protocols TAS 201, TAS 202, and TAS 203, but the state-level FPA process applies. SafeGuard installs only FPA-certified hurricane impact windows for all Palm Beach County projects.

How much can homeowners save on insurance with hurricane windows?

Kings Point homeowners who install certified hurricane-resistant windows and submit a wind-mitigation report to their insurer typically see premium reductions of 20–45%. The exact amount depends on the insurer, the policy type, and the number of protected openings. SafeGuard coordinates the post-installation wind-mitigation inspection and can connect you with a licensed inspector who provides the report your insurance company needs.

What window styles are available for Kings Point condo and townhome units?

The most common formats in Kings Point's 1970s-era condo and townhome sections are single-hung and casement windows. SafeGuard installs both styles in vinyl and aluminum frames from PGT, CGI, ES Windows, and Custom Window Systems. Frame color options are matched to the Kings Point master association's approved palette during the HOA submittal stage. All units include laminated glass with an interlayer that meets Florida Product Approval large-missile testing standards.

How long does impact window installation take in Kings Point?

A typical Kings Point condo or townhome with 8–12 windows takes 1–2 installation days once the permit is in hand. The longer part of the timeline is the pre-installation phase: HOA architectural review typically takes 2–4 weeks, and Palm Beach County permit review adds another 2–4 weeks. SafeGuard manages both processes in parallel where possible to keep the overall project moving. Final county inspection is usually scheduled within 5–7 business days of installation completion.

Does SafeGuard use subcontractors for impact window installation in Kings Point?

No. SafeGuard uses only in-house installation crews on every project in Kings Point and across all of South Florida. Every crew member is a direct SafeGuard employee trained on Palm Beach County's FPA-approved installation drawings and the specific requirements for shared-wall condo construction. The licensed contractor of record, Aldo Dellamano (CGC1525289), is responsible for every permit and inspection the company pulls.

What happened to Kings Point windows during Hurricane Wilma?

Hurricane Wilma crossed Palm Beach County in October 2005 as a strong Category 3 storm and caused significant damage to Kings Point's condo and townhome sections. Single-pane windows of the era failed under the wind load, allowing water intrusion that damaged interiors and personal property. The storm also triggered long power-restoration timelines that hit Kings Point's fixed-income 55+ residents particularly hard. Many owners who upgraded to hurricane impact windows after Wilma reported significantly less interior damage during subsequent storm seasons.

Ready to upgrade your Kings Point home?

Free estimate that includes the full permit pathway — sealed plans, product-approval verification, Notice of Commencement, and inspections.

Request a free estimate(954) 408-4000

Content Disclosure

This article is provided for general information only and reflects current Florida Building Code requirements, common South Florida construction practices, and SafeGuard's field experience. Actual project costs, permit requirements, material availability, and timelines vary based on your home, municipality, and project scope. Florida law requires that any residential construction work over $1,000 be performed by a licensed contractor — always consult a Florida-licensed contractor before starting an impact-window, impact-door, or roofing project and verify credentials at myfloridalicense.com. This guidance is not a substitute for a project-specific estimate or on-site evaluation by a licensed professional.